Vltor GB-2C Gas Block, Black Steel Clamp Type .750 Diameter Bore Black
|
Доставка
|
|
Покупка Если есть надпись "В корзину" - значит товар в наличии в Москве. |
|
Защита покупок Весь товар новый, контрактный, оригинальный. |
Vltor GB-2C Gas Block, Black Steel Clamp Type .750 Diameter Bore Black USA
GB-2C
The Vltor Low-Profile Gas Block is small enough to fit inside most rail systems. This gas blocks is an excellent replacement for the archaic fixed sight tower gas block, which has been the standard since the early 1960's.
The Vltor Low-Profile Gas Block covers one-inch of the barrel's surface and is made to the tightest tolerances. Manufactured from 17-4 PH Stainless Steel and available in matte black oxide finish or blasted to give a matte gray finish.
All models are made to fit barrels that feature a .750" (standard) or .625" (Pencil) diameter barrel.
Technical Information:
| Construction | 17-4 PH Stainless Steel |
| Compatibility | Fits within most AR-15/M16/M4 aftermarket/Free-Float handugard / rail systems. Made to fit either .625" or .750" diameter barrels. |
| Weight | GB-1C and GV-1CS: 1.6 oz GB-1S and GB-1SS: 1.4oz GB-2C and GB-2CS: 1.5oz GB-2S and GB-2SS: 1.4oz |
| Dimensions | Overall Width: GB-1C and GB-1CS: .800-inch GB-1S and GB-1SS: .800-inch GB-2C and GB-2CS: .925-inch GB-2S and GB-2SS: .925-inch Bottom thickness (measured from the centerline of the bore) GB-1C and GB-1CS: .600" GB-1S and GB-1SS: .500" GB-2C and GB-2CS: .600" GB-2S and GB-2SS: .560" Overall length: 1.000 inch |
Built to the tightest tolerances, the VLTOR low profile, clamp on and set screw gas blocks are small enough to fit inside most rail systems. These gas blocks were designed to be used when a rail system/handguard that is mounted over the entire gas system.
- Made from 17-4 PH Stainless Steel
- Comes in Matte Black Oxide( anti-reflection/anti-glare)
- Bore diameters : 0.750”
- Overall Length: 1.00 inch
- Overall Width (0.625” bore): 0.800 inch
- Overall Width (0.750” bore): 0.925 inch
- Overall Width (0.875″ bore): 1.00 inch
- Height from centerline of bore to top of gas block: 0.402″
- Bottom Thickness (measured from centerline of the bore of 0.750 inch gas block):
0.600 inch- Clamp Gas Block - Weight:1.6 oz- Clamp Gas Block
| Specifications | |
| Country | USA |