Oakley SI Ballistic M-Frame 3.0 Shooting Glasses Multicam Frame/Clear + Gray OO9146-24

Oakley SI Ballistic M-Frame 3.0 Shooting Glasses Multicam Frame/Clear + Gray OO9146-24 USA

Oakley SI Ballistic M Frame 3.0 Tactical Eyewear took the 2.0 to the next level.

Features:

• Plutonite lens blocks 100% of harmful UVA, UVB and UVC rays.
• On Authorized Protective Eyewear List (APEL)
• Compatible with Helo Gasket
• Compatible with over-ear hearing protection and comms; MICH, ACH, CVC, PASGT, and Crye Helmets; helmet-mounted night vision devices
• Quick, tool-free lens changing
• Ultralight design (1.05oz total)

Lens:

• Plutonite lenses blcok all UV light up to 400nm
• All lenses feature an advanced anti-fog coating

Lens Color:

• Clear = 89% VLT
• Grey = 15% VLT for bright light; meets MCEPS neutrality and chromaticity requirements

  Compliance: MIL-PRF-31013 & ANSI Z87.1-2010

  Oakley SI Ballistic M Frame 3.0 Tactical Sunglasses quite literally took the 2.0 to the next level. All the best features of the 2.0 remain, but with some key improvements for military and tactical personnel. To better accommodate peripheral gear such as night vision and comms devices, several design enhancements were made. First, the temple stems were thinned out to provide a good seal for over-ear systems, whether with or without a helmet. The Unobtanium sleeves were removed from the stems to further reduce thickness and weight, and the wrap of the frame was increased to assist the frame’s retention without their sleeves.

  The rake of the Plutonite lens was increased, bringing the lens closer to the face. To combat the reduced airflow here, an advanced anti-fog coating is also now standard on the 3.0 lens. Its new Argo lens for the 3.0 lens subtly provides more peripheral coverage than did its predecessors. All Ballistic 3.0 lenses are optimized with Oakley’s patented High Definition Optics.

  The complete Ballistic M Frame 3.0 unit is a much lighter and trimmer alternative, but still offers all the protection of the 2.0, still exceeding the ballistic fragmentation impact standards of MIL PRF-31013, Clause 3.5.1.1, and the high mass & high velocity impact requirements of ANSI Z87.1-2015. The Z87.1 stamp can be found near the top edge of the lens above the nose bridge, hidden by the brow of the frame.

  Ballistic M Frame 3.0 Upgrades from Ballistic M Frame 2.0

  • Frame re-design – Slightly sharper wrap and increased rake for a closer fit, while the thinner temples reduce weight and allow for better helmet fit and better seal with over-ear systems.
  • Compatible with helmets (Crye, PASGT, MICH, CVC, ACH) and helmet–mounted night vision devices.
  • Larger Argo lens provides additional coverage.
  • Advanced anti-fog lens coating helps maintain clear view in humid or strenuous conditions.

  Other Features:

  • Plutonite lens blocks 100% of harmful UVA, UVB and UVC rays.
  • Selected for PEO Soldier’s Authorized Protective Eyewear List (APEL)
  • Compatible with Oakley SI M-Frame Helo Gasket

  Frame Features:

  • Thin stem technology enables compatibility with over-ear hearing protection and communication systems
  • System features quick, tool-free lens changing
  • Ultra lightweight design (1.05-ounce total weight)
  • Full compatibility with helmet-mounted night vision devices
  • Full compatibility with MICH, ACH, CVC, PASGT, and Crye Helmets
  • Impact and chemical resistant O Matter frame material

  Lens Features:

  • All optional lenses are made of Plutonite, Oakley’s high purity optical-grade polycarbonate
  • All lenses feature Oakley High Definition Optics (HDO) with Polaric Ellipsoid geometry
  • All lenses feature an advanced anti-fog coating
  • UV protection of Plutonite lens material that filters out all UVA / UVB & harmful blue light up to 400nm wavelength

  Lens Color:

  • Clear lens features 89% visible light transmittance, suitable for use in low-light to no-light conditions.
  • Grey lens features 15% visible light transmittance, suitable for bright light; meets MCEPS neutrality and chromaticity requirements.

  Compliance:

  • Fully compliant with the ballistic and optical standards of MIL-PRF-31013 and ANSI Z87.1-2015

  Oakley Eyewear Care - Oakley Lens Cleaning Information

  All Oakley Lenses:

  • To help maintain the High Definition Optics (HDO) of Oakley lenses, your new eyewear comes with a specially-woven electrostatic Microclear bag for cleaning and storage. Using it will preserve the superior optical quality of Oakley’s pure Plutonite lenses. Hand wash and air-dry the Microclear bag regularly.

  Iridium Lenses:

  • Oakley Iridium lens coating is engineered to reduce glare and improve contrast. An array of available tints allows the wearer to balance light transmission in any light condition. The 12-micron jacket of Iridium must be treated with special care to avoid scratching. It is only recommended to use an Oakley Micro Bag or Oakley Lens Cleaning Kit to clean Oakley lens, do not use any other solvents, chemicals or third party cleaning kits because they have not been tested on our lenses and can possibly damage them.